Răng cào Wirtgen W1-13/22Z

Răng cào Wirtgen W1-13/22Z

  • Mã sản phẩm: 2493532
GIÁ BÁN: Liên hệ (Chưa bao gồm VAT)

Tên Răng cào Wirtgen W1-13/22Z
Hãng sản xuất Wirtgen
Nước sản xuất Đức
Tình trạng Mới 100%
Địa điểm Trên toàn quốc 
Hotline 0985 048 030

 


CÁC ĐẶC TÍNH NỔI BẬT

 

  Chính hãng (Hàn Quốc) Trung Quốc
Tên gọi  
Tên gọi khác  
Nhãn hiệu Vogele  
Xuất xứ Đức Trung Quốc hoặc nước khác
Phân phối   Các đơn vị gia công, phân phối, cửa hàng cấp vật tư xe bơm khác trên thị trường
Mô tả

Type Meaning

W1 Cylindrical carbide tip for mixing increasingly rocky soils

-13 13 mm carbide tip diameter

/ 22 Held in the toolholder bore with a shank diameter of 22 mm

Z Generation identification /product characteristic

Quantity per toolbox: 40 pieces

Weight per toolbox: 16.90 kg

Carbide weight per pick: 39 g

GENERATION Z picks excel due to unique product features, which, most importantly, reduce operating costs. Thanks to their adapted shank design and optimised carbide tip geometry with a reinforced carbide base, the picks in this product line are designed to withstand high impact loads and are thus the ideal solution for recycling and stabilising applications.

The relatively large steel body volume compared to conventional picks and the reinforced wear plate deliver the longest possible service life for tools and optimum protection for the upper part of the toolholders in applications involving abrasive materials

1 Greater fracture resistance in the carbide tip thanks to improved carbide composition and an adapted tip geometry.

2 Greater wear volume in the steel body as a limiting factor ensures the carbide is fully exploited on the pick.

3 Improved tensile strength in the pick shank thanks to the repositioning of the clamping sleeve bearing on the lower end of the pick shank.

4 Greater hardness in the wear plate ensures maximum toolholder protection.

5 Time-tested WIRTGEN clamping sleeve in reinforced design ensures that the pick is permanently and dependably secured in the toolholder bore.

Steel body volume in the wear-critical section in comparison

The optimised carbide mix improves carbide tensile strength. The lower pick head height in GENERATION Z reduces the siphon effect, thus improving the tensile strength in the pick shank in the face of impact loads.

The larger volume in the wear-critical section and the greater hardness in the wear plate not only extend the expected longer service life for the pick, but also enhances toolholder protection.

Increased contact surface of the GENERATION Z wear plate

Worn toolholder system in comparison

Minimisation of the pick shank’s fracture tendency in comparison

The clamping sleeve in GENERATION Z ensures optimal tool rotation behaviour thanks to its precise round shape.

Compared to the previous model with shanks 22 and 25 mm in diameter, the pick shank fracture tendency is minimised in the GENERATION Z by about 45%. This is achieved by offsetting or displacing the stops from the centre to the bottom of the pick shank (see left picture).

 
Tình trạng (mới/ ĐQSD)
Mới 100%
Các phụ tùng/ phụ kiện đi kèm  
Công dụng    
Độ bền và Tuổi thọ trung bình    
Những yếu tố ảnh hưởng đến tuổi thọ trung bình
 
Cam kết chất lượng    
Bảo hành    
Các loại máy phù hợp    
So sánh giá    
Lợi ích    
Quy cách đóng gói    
Phương thức Giao hàng, vận chuyển Giao hàng tại kho, vận chuyển toàn quốc khi nhận đủ tiền thanh toán. Giao hàng tại kho, vận chuyển toàn quốc khi nhận đủ tiền thanh toán.
Khả năng cung cấp Sản phẩm có sẵn với số lượng lớn
Khuyến nghị  
Ghi chú/ các đặc điểm phân biệt hàng hoá chính hãng và hàng thay thế  

 

Hiện quý khách có thể tìm mua phụ tùng Wirtgen thuận tiện và dễ dàng tại kho của Tam Hoàng Minh (Phí vận chuyển sẽ được tính nếu phát sinh).

 

 

 

 

Không có đánh giá nào cho sản phẩm này.

Viết đánh giá

Chú ý: Không sử dụng các định dạng HTML!
    Chưa tốt           Tốt

Danh mục sản phẩm

0962740907